subject
Engineering, 11.02.2020 05:31 metatiley

Consider a region growing method that uses the homogeneity measure H(A) TRUE H(R.)= FALSE if σ 1 if σ > 1 where σ, is the sample variance of the pixels in region Ri. Assume that the method starts with the upper left pixel and always attempts to grow to a new connected pixel (assuming eight neighbors) whose gray level is closest to the average of the gray levels of the current region. For the grayscale image below, find the first region that will be generated using this algorithm (grow from the upper left pixel until H(R1) is FALSE). Circle this region in the image and compute the mean and sample variance of the region. For each step in the region growing process, write down the pixel values in the current region and their mean and variance. Assume that the sample variance σ, of a region Ri is defined by where N is the number of pixels in R, I, are the pixel values in Ri, and μ is the mean of the pixel values in Ri. The sum is over the pixels in Ri. The gray-level image is 8 814 10 11 129 12 10 10 1210 12 128 14 11 8 9 11

ansver
Answers: 2

Another question on Engineering

question
Engineering, 03.07.2019 14:10
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
question
Engineering, 04.07.2019 18:10
Apump is used to circulate hot water in a home heating system. water enters the well-insulated pump operating at steady state at a rate of 0.42 gal/min. the inlet pressure and temperature are 14.7 lbf/in.2, and 180°f, respectively; at the exit the pressure is 60 lbf/in.2 the pump requires 1/15 hp of power input. water can be modeled as an incompressible substance with constant density of 60.58 lb/ft3 and constant specific heat of 1 btu/lb or. neglecting kinetic and potential energy effects, determine the temperature change, in °r, as the water flows through the pump.
Answers: 1
question
Engineering, 04.07.2019 19:20
Asimple speed reducer is composed of 2 spur gears. the pinion gear has a pitch diameter of 0.75" and 36 teeth while the driven gear has a pitch diameter of 4.0" and 192 teeth. a)-what is the diametral pitch of each gear? b)-if an electric motor rotating ccw at 3000 rpm is coupled to the pinion, what is the rotational speed of the driven gear? c)-if the torque delivered to the pinion is 1 n-m, what is the torque on the driven gear? d)-what is the power transmitted by the gear train?
Answers: 1
question
Engineering, 06.07.2019 02:30
Air (c-1.006 kj/kg.k, r-0.287 kj/kg.k) enters a nozzle steadily at 280 kpa and 77°c with a velocity of 50 m/s and exits at 85 kpa and 320 m/s. the heat losses from the nozzle to the surrounding medium at 20°c are estimated to be 3.2 kj/kg. determine (a) the exit temperature and (b) the total entropy change for this process. solve this problem using constant specific heats.
Answers: 1
You know the right answer?
Consider a region growing method that uses the homogeneity measure H(A) TRUE H(R.)= FALSE if σ 1 if...
Questions
question
Chemistry, 29.05.2020 03:59
question
Mathematics, 29.05.2020 03:59