Engineering, 29.01.2020 05:40 angelina6836
Asteel plate is to be attached to a support with three bolts. the plate is 50 mm wide and 11.2 mm thick and the yield strength of the steel is 250 mpa. the ultimate bearing strength of the bolts is 540 mpa. a factor of safety of 1.67 with respect to yield is required for the plate. a factor of safety of 4.0 with respect to the ultimate bearing strength is required for the bolts. determine the minimum bolt diameter required to develop the full strength of the plate. (note: consider only the gross cross-sectional area of the plate)
Answers: 2
Another question on Engineering
Engineering, 04.07.2019 18:10
An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature
Answers: 2
Engineering, 04.07.2019 18:10
Compute the pressure drop of 30°c air flowing with a mean velocity of 8 m/s in a circular sheet-metal duct 300 mm in diameter and 15 m long. use a friction factor, f 0.02, and pair = 1.1644 kg/m a. 37.26 pa b. 25.27 pa n c. 29.34 pa d. 30.52 pa
Answers: 1
Engineering, 04.07.2019 18:20
What is the heat treatment of metals? what is the benefit of it? why and how it's useful? answer in details, do not write by hand.
Answers: 3
Engineering, 04.07.2019 18:20
Asimple rankine cycle uses water as the working fluid. the water enters the turbine at 10 mpa and 480c while the condenser operates at 6 kpa. if the turbine has an isentropic efficiency of 80 percent while the pump has an isentropic efficiency of 70 percent determine the thermal efficiency
Answers: 1
You know the right answer?
Asteel plate is to be attached to a support with three bolts. the plate is 50 mm wide and 11.2 mm th...
Questions
History, 16.10.2019 02:50
Mathematics, 16.10.2019 02:50
Health, 16.10.2019 02:50
History, 16.10.2019 02:50
Social Studies, 16.10.2019 02:50
Geography, 16.10.2019 02:50
Biology, 16.10.2019 02:50
