subject
Engineering, 29.01.2020 04:47 Jrstx333

A20-cm-long, cylindrical graphite (pure carbon) rod is inserted into an oxidizing atmosphere at 1145 k and 1.013 x 10⁵ pa pressure. the oxidizing process is limited by the diffusion of oxygen counterflow to the carbon monoxide that is formed on the cylindrical surface. under the conditions of the combustion process, the diffusivity of oxygen in the gas mixture may be assumed to be 1.0 x 10⁻⁵ m²/s.
(a) determine the moles of co that are produced at the surface of the rod per second at the time when the diameter of the rod is 1.0 cm and the oxygen concentration that is 1.0 cm radial distance from the rod is 40 mol%. assume a steady-state process.
(b) what would be the composition of oxygen 1.0 cm from the center of the rod?

ansver
Answers: 2

Another question on Engineering

question
Engineering, 03.07.2019 14:10
When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point
Answers: 3
question
Engineering, 03.07.2019 15:10
Two flowing streams of argon gas are adiabatically mixed to form a single flow/stream. one stream is 1.5 kg/s at 400 kpa and 200 c while the second stream is 2kg/s at 500 kpa and 100 ? . it is stated that the exit state of the mixed single flow of argon gas is 150 c and 300 kpa. assuming there is no work output or input during the mixing process, does this process violate either the first or the second law or both? explain and state all your assumptions.
Answers: 1
question
Engineering, 04.07.2019 18:10
Determine whether or not it is possible to compress air adiabatically from k to 140 kpa and 400 k. what is the entropy change during this process?
Answers: 3
question
Engineering, 04.07.2019 18:10
For the closed feedwater heater below, feedwater enters state 3 at a pressure of 2000 psia and temperature of 420 °f at a rate of ix10 ibhr. the feedwat extracted steam enters state 1 at a pressure of 1000 psia and enthalpy of 1500 btu/lbm. the extracted er leaves at an enthalpy of 528.7 btu/lbm steam leaves as a saturated liquid. (16) a) determine the mass flow rate of the extraction steam used to heat the feedwater (10) b) determine the terminal temperature difference of the closed feedwater heater
Answers: 3
You know the right answer?
A20-cm-long, cylindrical graphite (pure carbon) rod is inserted into an oxidizing atmosphere at 1145...
Questions
question
Chemistry, 04.07.2019 19:00
question
Geography, 04.07.2019 19:00