Atest of driver’s perception/reaction time is being conducted on a special testing track with level, wet pavement and a driving speed of 55 mile/hour. when the driver is sober, a stop can be made just in time to avoid hitting an object that is first visible 425 ft ahead. after a few drinks under exactly the same condition, the driver fails to stop in time and strikesan object at a speed of 35 mi/hour. determine thedriver’s perception/reaction time before and after drinking.

Amass of m 1.5 kg of steam is contained in a closed rigid container. initially the pressure and temperature of the steam are: p 1.5 mpa and t 240°c (superheated state), respectively. then the temperature drops to t2= 100°c as the result of heat transfer to the surroundings. determine: a) quality of the steam at the end of the process, b) heat transfer with the surroundings. for: p1.5 mpa and t 240°c: enthalpy of superheated vapour is 2900 kj/kg, specific volume of superheated vapour is 0. 1483 m/kg, while for t 100°c: enthalpy of saturated liquid water is 419kj/kg, specific volume of saturated liquid water is 0.001043m/kg, enthalpy of saturated vapour is 2676 kj/kg, specific volume of saturated vapour is 1.672 m/kg and pressure is 0.1 mpa.

Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.

Draw the engineering stress-strain curve for (a) bcc; (b) fcc metals and mark important points.