subject
Engineering, 27.01.2020 21:31 Mattorth512345

Address space, memory consider a hypothetical 18-bit processor called hyp18 with all registers, including pc and sp, being 18 bits long. the smallest addressable unit in memory is an 8-bit byte. a. (4 points) what is the size of hyp18's address space in bytes and kb? how many address lines does hyp18 require? address space: address space: kb (kilobytes). bytes address bus lines: b. (6 points) assume that first quarter of the address space is dedicated for hyp18's ram memory and the upper half of the address space is reserved for hyp18's flash memory. give address ranges for the ram and flash memories. fill in the table below. what is the size of the ram memory and the flash memory? start byte address end byte address ram memory flash memory ram memory size [bytes/kb]: flash memory size [bytes/kb]: the msp430f20× is a microcontroller with 64 kb of address space divided between code memory (flash), ram memory, and input/output peripherals. it has 1,024 bytes of ram memory starting at the address 0x0200, and 256 bytes of address space reserved for special purpose registers and 8-bit input/output peripherals (starting at the address ox) followed by 256 bytes reserved for 16-bit input/output peripherals. the flash memory of 16 kb resides at the top of address space (highest addresses in the address space).

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 03:10
What precautions should you take to prevent injuries when dealing with heavy loads?
Answers: 1
question
Engineering, 04.07.2019 16:10
An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)
Answers: 2
question
Engineering, 04.07.2019 18:10
Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.
Answers: 3
question
Engineering, 04.07.2019 18:20
Vibration monitoring this technique uses the noise or vibration created by mechanical equipment and in seme cases by plant systems to detemine their actual condtion. a)- true b)- false
Answers: 2
You know the right answer?
Address space, memory consider a hypothetical 18-bit processor called hyp18 with all registers, incl...
Questions
question
Mathematics, 14.01.2020 00:31
question
Mathematics, 14.01.2020 00:31
question
Mathematics, 14.01.2020 00:31