Engineering, 20.01.2020 18:31 christyr2002

The college of engineering has an emergency water tank that is cylindrical and 3 feet high. the tank is initially filled with water at 60of and has a 3-foot diameter opening to the atmosphere at the top. the outlet at the bottom of the tank with a diameter of 0.3 inches is opened and water begins to empty out of the tank. the average velocity of the water exiting the tank is given by torricelliâs law, v = (2gh)1/2, where h is the height of the water above the center of the outlet port and g is the acceleration due to gravity. ignoring any water loss through the top opening.

determine:
a. how long it will take the water level to drop to 1.5 feet from the bottom.
b. how long it will take to drain the entire tank.

Answers: 2

Show answers

Another question on Engineering

Engineering, 03.07.2019 14:10

Line joining liquid phase with liquid and solid phase mixture is known as: a) liquidus b) solidus c) tie line d) none of the mentioned

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Which of the following ziegler nichols tuning methods the response of the controller to a step input should exhibit an s-shaped curve? a)-open loop mode b)-closed loop mode c)-both modes (open & closed) d)-none of the modes (open & closed)

Answers: 3

Answer

Engineering, 04.07.2019 19:10

Air inially occupying a volume of 1 m2 at 100 kpa, 27 c undergoes three internally reversible processes in series. process 1-2 compression to 500 kpa during which pv constant process 2-3 adiabatic expanslon to 100 kpa process 3-1: constant-pressure expansion to 100 kpa (a) calculate the change of entropy for each of the three processes. (b) calculate the heat and work involved in each process. (c) is this cycle a power cycle or refrigeration cycle?

Answers: 3

Answer

Engineering, 04.07.2019 19:20

Air enters a horizontal, constant-diameter heating duct operating at steady state at 290 k, 1 bar, with a volumetric flow rate of 0.25 m°/s, and exits at 325 k, 0.95 bar. the flow area is 0.04 m2. assuming the ideal gas model with k = 1.4 for the air, determine (a) the velocity at the inlet and exit, each in m/s, and (c) the rate of heat transfer, in kw flow rate, in kg/s, (b) the mass kg 0.3

Answers: 2

Answer

You know the right answer?

The college of engineering has an emergency water tank that is cylindrical and 3 feet high. the tank...

Questions