subject
Engineering, 15.01.2020 21:31 kaffolter25

To cool a summer home without using a vapor compression refrigeration cycle, air is routed through a plastic pipe (k=0.15 w/m*k, d_inner=0.15m, d_outer=0.17m) that is submerged in an adjoining body of water. the water temperature is nominally at t_infinity=17 degrees celsius and has a convection coefficient of h=1500w/m^2*k is maintained at the outer surface of the pipe. if air from the home enters at t_m, i=29 degrees celsius and a volumetric flow rate of v_i=0.025 m^3/s, what pipe length, l, is needed to provide a discharge temperature of t_m, o=21 degrees celsius?

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 16:10
The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.
Answers: 1
question
Engineering, 04.07.2019 18:10
Afluid flows with a velocity field given by v=(x/t)i.. determine the local and convective accelerations when x=3 and t=1.
Answers: 2
question
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
question
Engineering, 04.07.2019 18:10
The higher the astm grain-size number, the coarser the grain is. a)-true b)-false
Answers: 3
You know the right answer?
To cool a summer home without using a vapor compression refrigeration cycle, air is routed through a...
Questions
question
Mathematics, 18.02.2021 05:40
question
Mathematics, 18.02.2021 05:40
question
Mathematics, 18.02.2021 05:40