Engineering, 15.01.2020 19:31 kingjustin0825
Which of the following is correct regarding the principal stresses and maximum in-plane shear stresses? a. principal stresses cannot be negative. b. the shear stress over principal stress planes is always zero. c. a principal stress plane can be reached by rotating the maximum in-plane shear stress plane 90° in the clockwise direction. d. the maximum in-plane shear stress is always smaller than principal stresses.
Answers: 1
Another question on Engineering
Engineering, 04.07.2019 18:10
Condition monitoring is a major component of. (clo4) a)- predictive maintenance. b)-preventive maintenance c)-proactive maintenance d)-reactive maintenance.
Answers: 1
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Engineering, 04.07.2019 18:20
An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid
Answers: 3
Engineering, 04.07.2019 18:20
Water vapor initially at 10 bar and 400 °c is contained within a piston-cylinder assembly. the water lost heat to the surrounding according to isochoric (iso-volumetric) process until its temperature is 150 °c. the water is then condensed isothermally to saturated liquid. for the water as a system, calculate the work in kj/kg
Answers: 2
You know the right answer?
Which of the following is correct regarding the principal stresses and maximum in-plane shear stress...
Questions
Biology, 27.08.2019 00:00
Mathematics, 27.08.2019 00:00
Mathematics, 27.08.2019 00:00
Mathematics, 27.08.2019 00:00
English, 27.08.2019 00:00
Physics, 27.08.2019 00:00
Mathematics, 27.08.2019 00:00
Mathematics, 27.08.2019 00:00
English, 27.08.2019 00:00
