Engineering, 31.12.2019 02:31 chantelljenkins2
Determine the change in the enthalpy of helium, in kj/kg, as it undergoes a change of state from 100 kpa and 20 oc to 600 kpa and 300 oc
Answers: 1
Engineering, 04.07.2019 18:10
During a steady flow process, the change of energy with respect to time is zero. a)- true b)- false
Answers: 2
Engineering, 04.07.2019 18:10
Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.
Answers: 3
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Engineering, 04.07.2019 18:20
Find the minimum film thickness for a journal bearing with the data below. shaft diameter, d-50 mm, clearance ratio, cdratio? 0.001, shaft speed, n 2000 rpm; bearing length. i 200 mm; eccentricity ration, ? -0.55. ( note, cdratio-ca/d) the minimum film thickness is um
Answers: 2
Determine the change in the enthalpy of helium, in kj/kg, as it undergoes a change of state from 100...
Social Studies, 15.12.2020 23:30
Mathematics, 15.12.2020 23:30
Spanish, 15.12.2020 23:30
History, 15.12.2020 23:30
Mathematics, 15.12.2020 23:30
Biology, 15.12.2020 23:30
Mathematics, 15.12.2020 23:30
Health, 15.12.2020 23:30
Mathematics, 15.12.2020 23:30
Computers and Technology, 15.12.2020 23:30
Mathematics, 15.12.2020 23:30
Mathematics, 15.12.2020 23:30
Computers and Technology, 15.12.2020 23:30