subject
Engineering, 27.12.2019 05:31 ericavasquez824

Apipe with closed ends has a wall thickness of 10 mm and an inner diameter of 0.60 m. it filled with a gas at 20 mpa pressure and subjected to a torque about its long axis of 1200 kn·m. a. determine the three principal normal stresses and the maximum shear stress. recall from basic mechanics that: = t / b. if the pipe is constructed of oil-quenched and tempered 4340 steel with a yield strength of 1620 mpa, what is the safety factor against yielding using the tresca maximum shear stress criterion? c. prior to loading, an inside crack is discovered through 25% of the thickness of the sample. with this crack, what is the safety factor against fracture if the plane strain fracture toughness is 87.4mpa√m?

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 19:10
Apressure vessel with an r/t 20 cannot be treated as thin walled vessel. a)-trune b)- false
Answers: 3
question
Engineering, 04.07.2019 19:20
The process in which the system pressure remain constant is called a)-isobaric b)-isochoric c)-isolated d)-isothermal
Answers: 3
question
Engineering, 06.07.2019 04:10
Areheat rankine cycle operates with water as the working fluid. steam enters the first turbine at 8 mpa and 450°c and exits at 0.8 mpa. it is then reheated to 400°c before entering the second turbine, where it exits at 10 kpa. if the amount of work into the pump is 8.04 kj/kg and the net work per cycle produced is 1410.25 kj/kg, determine the thermal efficiency of the cycle.
Answers: 3
question
Engineering, 06.07.2019 05:10
It has been stated that the quality of the sheared edges can influence the formability of sheet metals. explain why
Answers: 3
You know the right answer?
Apipe with closed ends has a wall thickness of 10 mm and an inner diameter of 0.60 m. it filled with...
Questions