Engineering, 25.12.2019 02:31 lizbethmillanvazquez
Along, hemicylindrical (1-m radius) shaped furnace used to heat treat sheet metal products is comprised of three zones.
the heating zone (1) is constructed from a ceramic plate of emissivity 0.85 and is operated at 1600 k by gas burners.
the load zone (2) consists of sheet metal products.
the refractory zone (3) is fabricated from insulating bricks having an emissivity of 0.6.
assuming steady-state conditions, diffuse, gray surfaces, and negligible convection, determine the temperature of the insulating brick surface. submit your answer in k (enter numerical value only without units).
Answers: 3
Another question on Engineering
Engineering, 04.07.2019 18:10
The thermal expansion or contraction of a given metal is a function of the f a)-density b)-initial temperature c)- temperature difference d)- linear coefficient of thermal expansion e)- final temperature f)- original length
Answers: 2
Engineering, 04.07.2019 18:10
An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature
Answers: 2
Engineering, 04.07.2019 18:10
Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?
Answers: 3
Engineering, 04.07.2019 18:10
The flow rate of air through a through a pipe is 0.02 m5/s. a pitot static tube is placed in the flow. the radius of the pitot static tube is 1 mm. assuming the flow to be steady and the air to be at 300k, calculate the difference in total and static pressure if the diameter of the pipe is: (a) d 0.1 m d 0.05 m (c) d 0.01 m
Answers: 2
You know the right answer?
Along, hemicylindrical (1-m radius) shaped furnace used to heat treat sheet metal products is compri...
Questions
Business, 17.12.2019 13:31
History, 17.12.2019 13:31
English, 17.12.2019 13:31
Mathematics, 17.12.2019 13:31
History, 17.12.2019 13:31
Social Studies, 17.12.2019 13:31
