subject
Engineering, 24.12.2019 19:31 klocke2001

Ahomogenous reservoir is completed saturated with oil (so=1) that has an oil compressibility of 1×10-5 psi-1 (rock compressibility is negligible).

the initial reservoir pressure, pi, is 5000 and the well is operated immediately in depletion flow at constant pressure (pwf = 500 psi).

compute the theoretical ultimate % recovery if the reservoir is operated in primary recovery

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:20
Amixture of slurry and mud is to be pumped through a horizontal pipe of diameter 500 mm. the fluid behaves as a bingham plastic with a yield stress of 30 pa and viscosity 0.04 pa.s. describe the effects of the shear stress through a transverse section of the pipe by plotting the variation in shear stress and velocity profile: (i) just before the slurry starts to move (ii) as the slurry flows when the pressure gradient is double that in part (i)
Answers: 3
question
Engineering, 04.07.2019 19:20
Amass-spring-viscous damper system of mass 3 kg has a frequency of 100 rad/s and is critically damped. its initial conditions are x(0)-3 mm and (0)-2.3 m/s. does the system overshoot its equilibrium position? prove your answer
Answers: 1
question
Engineering, 06.07.2019 02:30
An electric motor is used to drive a power press which makes steel turning moment diagrams 323 pressings from a metal sheet. the motor runs at a mean speed of 50 rev/s. the torque required is 10.0nm for 0.2s, followed by 1.0nm for0.3 s with this sequence then being repeated. what is the minimum power required of the motor and the moment of incrtia required for the t1ywhcel if the speed fluctuations are to be restricted to 1.5%?
Answers: 3
question
Engineering, 06.07.2019 06:10
Aparallel helical gearset consists of a 19-tooth pinion driving a 57-tooth gear. the pinion has a left-hand helix angle of 30, a normal pressure angle of 20, and a normal module of 2.5 mm. find: (a) the normal, transverse, and axial circular pitches (b) the transverse diametral pitch and the transverse pressure angle (c) the addendum, dedendum, and pitch diameter of each gear
Answers: 1
You know the right answer?
Ahomogenous reservoir is completed saturated with oil (so=1) that has an oil compressibility of 1×10...
Questions
question
Mathematics, 07.04.2021 21:50
question
English, 07.04.2021 21:50
question
Mathematics, 07.04.2021 21:50
question
Computers and Technology, 07.04.2021 21:50