subject
Engineering, 22.12.2019 16:31 SchoolSucks234

Q.3: (50 marks)
a road prohle runs on three slopes, starts from station a to first part starts from
second part is honzontal starts from (d. g) and the last part starts from g w iode
(44%) as shown in table below,
11 design level at distances (10 m and 45 m) is 3525 and 360 5m respectively
depth of fill at distance 10m is 50 cm depth of cut at distance som om
calculate:
1. reduced level, design level, missed data of all stations
2. depth of cut and fill
3. slope of three parts in the form of (1v: ? h)
station
distance
i. s
fs
b. s
3.0
а
0
b
10
20
26
28
2.3
30
40
50
1.8
12.1
g
1.5
h
60
80
100
2.2
120

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.
Answers: 3
question
Engineering, 04.07.2019 18:10
Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.
Answers: 3
question
Engineering, 04.07.2019 18:10
Ahot wire operates at a temperature of 200°c while the air temperature is 20°c. the hot wire element is a tungsten wire of 5 um diameter and 2 mm in length. plot using excel current, heat transfer and heat generated by the wire for air velocity varying from 1-10 m/s in steps of lm/s? matlab the sensor voltage output, resistance, or assume nu 0.989 re033pr13 take air properties at tr (200°c20°c)/2 = 110°c properties of tungsten: c 0.13 kj/kg.k 3 p 19250 kg/m k (thermal conductivity) = 174 w/m.k
Answers: 2
question
Engineering, 04.07.2019 18:20
Ahe-xe mixture containing a 0.75 mole fraction of helium is used for cooling electronics in an avionics application. at a temperature of 300 k and atmospheric pressure, calculate the mass fraction of helium and the mass density, molar concentration and molecular weight of the mixture. if the cooling capacity is 10 l, what is the mass of the coolant?
Answers: 3
You know the right answer?
Q.3: (50 marks)
a road prohle runs on three slopes, starts from station a to first part starts...
Questions
question
Social Studies, 11.11.2020 01:00
question
Mathematics, 11.11.2020 01:00
question
Mathematics, 11.11.2020 01:00
question
Mathematics, 11.11.2020 01:00
question
Business, 11.11.2020 01:00