Engineering, 20.12.2019 05:31 mdaniella522
A10-cm-diameter, 30-cm-high cylindrical bottle contains cold water at 3°c. the bottle is placed in windy air at 27°c. the water temperature is measured to be 11°c after 45 min of cooling. disregarding radiation effects and heat transfer from the top and bottom surfaces, estimate the average wind velocity.
Answers: 2
are 
are
![N_{u}=0.3+\frac{0.62Re^{0.5}Pr^{\frac{1}{3}}}{[1+(0.4/Pr)^{\frac{2}{3} } ]^{\frac{1}{4}}}[1+(\frac{Re}{28200} )^{\frac{5}{8} }]^{\frac{4}{5} }](/tpl/images/0427/2934/e5381.png)
![62.42=0.3+\frac{0.62Re^{0.5}0.7317^{\frac{1}{3}}}{[1+(0.4/0.7317)^{\frac{2}{3} } ]^{\frac{1}{4}}}[1+(\frac{Re}{28200} )^{\frac{5}{8} }]^{\frac{4}{5} }](/tpl/images/0427/2934/705b4.png)
Another question on Engineering
Engineering, 04.07.2019 18:20
Asimple rankine cycle uses water as the working fluid. the water enters the turbine at 10 mpa and 480c while the condenser operates at 6 kpa. if the turbine has an isentropic efficiency of 80 percent while the pump has an isentropic efficiency of 70 percent determine the thermal efficiency
Answers: 1
Engineering, 04.07.2019 19:20
To save energy, the air supply to a 2000 ft office has been shut off overnight and the room temperature has dropped to 40°f. in the morning, the thermostat is reset to 70°f and warm air at 120 f begins to flov in at 200ft'/min. the air is well mixed within the room, and an equal mass flow of air at room temperature (changing with time) is withdrawn through a return duct. the air pressure is nearly 1 atm everywhere. ignoring heat transfer with the surroundings and kinetic and potential energy effects, estimate how long it takes for the room temperature to reach 70°f. plot the room temperature as a function of time.
Answers: 1
Engineering, 06.07.2019 04:10
Areheat rankine cycle operates with water as the working fluid. steam enters the first turbine at 8 mpa and 450°c and exits at 0.8 mpa. it is then reheated to 400°c before entering the second turbine, where it exits at 10 kpa. if the amount of work into the pump is 8.04 kj/kg and the net work per cycle produced is 1410.25 kj/kg, determine the thermal efficiency of the cycle.
Answers: 3
Engineering, 06.07.2019 04:10
Aspherical thermocouple measurement errors a spherical thermocouple made of constantin transfer coefficient between the gas and the thermocouple is h used to measure the temperature of a gas. the heat 400 w/m2 k. calculate the maximum diameter d of the thermocouple if the thermocouple's measurement error should be w 23 within 5% of the initial temperature difference in 5 seconds. for constantin, k 8920 kg/m3, and c 410 j/kg. k.
Answers: 3
You know the right answer?
A10-cm-diameter, 30-cm-high cylindrical bottle contains cold water at 3°c. the bottle is placed in w...
Questions
Computers and Technology, 16.07.2019 06:10
Computers and Technology, 16.07.2019 06:10
