subject
Engineering, 20.12.2019 00:31 lennyatme

Consider the turbocharger of an internal combustion engine. the exhaust gases enter the turbine at 450c at a rate of 0.02 kg/s and leave at 400c. air enters the compressor at 70c and 95 kpa at a rate of 0.018 kg/s and leaves at 135 kpa. the mechanical efficiency between the turbine and the compressor is 95 percent (5 percent of turbine work is lost during its transmission to the compressor). using air properties for the exhaust gases, determine

(a) the air temperature at the compressor exit and

(b) the isentropic efficiency of the compressor.

ansver
Answers: 1

Another question on Engineering

question
Engineering, 03.07.2019 14:10
The y form of iron is known as: a) ferrite b) cementite c) perlite d) austenite
Answers: 3
question
Engineering, 04.07.2019 18:10
The mass flow rate of the fluid remains constant in all steady flow process. a)- true b)- false
Answers: 1
question
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
question
Engineering, 04.07.2019 18:10
Items are similar to the free issue items, but their access is limited. (clo5) a)-bin stock items free issue b)-bin stock controlled issue c)-critical or insurance spares d)-rebuildable spares e)-consumables
Answers: 1
You know the right answer?
Consider the turbocharger of an internal combustion engine. the exhaust gases enter the turbine at 4...
Questions
question
Mathematics, 21.10.2019 22:50