Engineering, 18.12.2019 07:31 mmelody5
8.20 engine oil flows through a 25‐mm‐diameter tube at a rate of 0.5 kg/s. the oil enters the tube at a temperature of 25°c, while the tube surface temperature is maintained at 100°c. determine the oil outlet temperature for a 5‐m and for a 100‐m long tube. for each case, compare the log mean temperature difference to the arithmetic mean temperature difference
Answers: 1
Another question on Engineering
Engineering, 03.07.2019 15:10
If you were designing a bumper for a car, would you prefer it to exhibit elastic or plastic deformation? why? consider the functions of a bumper in both a minor "fender-bender" and a major collision.
Answers: 1
Engineering, 04.07.2019 18:20
Acertain flow of air (at stp) has a velocity distribution given by v i (in ft/s). if this flow is going through a 4 ft square area in the yz-plane (centered at the origin), what is the mass flow rate (in lbm/s)?
Answers: 2
Engineering, 04.07.2019 18:20
The characteristic roots of a dynamic system are: 1.7920 1.8160 i, -1.7920 1.8160 i, -0.4160 what is the order of this system? what are the settling time and damping ratio of the system?
Answers: 3
Engineering, 04.07.2019 18:20
An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid
Answers: 3
You know the right answer?
8.20 engine oil flows through a 25‐mm‐diameter tube at a rate of 0.5 kg/s. the oil enters the tube a...
Questions
Mathematics, 24.07.2019 12:30
History, 24.07.2019 12:30
History, 24.07.2019 12:30
Mathematics, 24.07.2019 12:30
Health, 24.07.2019 12:30
History, 24.07.2019 12:30
Chemistry, 24.07.2019 12:30
Social Studies, 24.07.2019 12:30
