Engineering, 13.12.2019 20:31 scottmichetti
During a regeneration process, some steam is extracted from the turbine and is used to heat the liquid water leaving the pump. this does not seem like a smart thing to do since the extracted steam could produce some more work in the turbine. how do you justify this action?
Answers: 2
Engineering, 03.07.2019 14:10
When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point
Answers: 3
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
Engineering, 04.07.2019 18:10
Items are similar to the free issue items, but their access is limited. (clo5) a)-bin stock items free issue b)-bin stock controlled issue c)-critical or insurance spares d)-rebuildable spares e)-consumables
Answers: 1
Engineering, 04.07.2019 18:20
Apiston-cylinder device contains 0.1 m3 of liquid water and 0.9 m3 of water vapor in equilibrium at 800 kpa. heat is transferred at constant pressure until the temperature of water reaches 350 °c. determine (a) the quality of water at the initial state (b) the work associated with this process, (c) the heat associated with this process.
Answers: 2
During a regeneration process, some steam is extracted from the turbine and is used to heat the liqu...
English, 12.03.2020 17:34
Engineering, 12.03.2020 17:34
Computers and Technology, 12.03.2020 17:34
History, 12.03.2020 17:34
Computers and Technology, 12.03.2020 17:35
Computers and Technology, 12.03.2020 17:35
Business, 12.03.2020 17:35