Engineering, 13.12.2019 19:31 tevaughn06
To measure viscosity of newtonian fluids, one standard approach is to use a couette viscometer. in this device, a stationary cylinder (radius, ar) is inside a larger cylinder (radius, r). fluid is placed between the two cylinders and the outer cylinder rotates at an angular velocity ws-1. the gap between the cylinders is much smaller than the overall height and gravity acts only in the z-direction. at steady state, what is the velocity expression of the fluid?
Answers: 3
Engineering, 04.07.2019 18:20
Asolid cylinder is concentric with a straight pipe. the cylinder is 0.5 m long and has an outside diameter of 8 cm. the pipe has an inside diameter of 8.5 cm. the annulus between the cylinder ad the pipe contains stationary oil. the oil has a specific gravity of 0.92 and a kinematic viscosity of 5.57 x 10-4 m2/s. most nearly, what is the force needed to move the cylinder along the pipe at a constant velocity of 1 m/s?
Answers: 3
Engineering, 04.07.2019 18:20
Along 8-cm diameter steam pipe whose external surface temperature is 900c connects two buildings. the pipe is exposed to ambient air at 70c with a wind speed of 50 km/hr blowing across the pipe. determine the heat loss from the pipe per unit length. (b) air at 500c enters a section of a rectangular duct (15 cm x 20 cm) at an average velocity of 7 m/s. if the walls of the duct are maintained at 100c. a) the length of the tube for an exit temperature of the air to be 40 0c. b)the rate of heat transfer from the air. c) the fan power needed to overcome the pressure drop in this section of the duct.
Answers: 1
Engineering, 04.07.2019 19:10
10 kg of co2 is initially contained at 400 kpa and 300 k. the gas constant for carbon dioxide is 189 j/lkg k) and has a specific heat ratio, k, of 1.289. isentropic expansion then occurs until the pressure is 200 kpa. a) determine the initial volume of co2 in m. b) determine the final temperature in k. c) determine the work done by the system during the expansion kl.
Answers: 2
Engineering, 04.07.2019 19:20
Heat transfer by is the fastest mode of heat transfer that requires no intervening medium. a)-conduction b)-convection c)-radiation d)-conduction and convection
Answers: 1
To measure viscosity of newtonian fluids, one standard approach is to use a couette viscometer. in t...
Biology, 18.12.2020 08:20
Mathematics, 18.12.2020 08:20
Mathematics, 18.12.2020 08:20
Mathematics, 18.12.2020 08:20
Mathematics, 18.12.2020 08:20
History, 18.12.2020 08:20
Mathematics, 18.12.2020 08:20
Health, 18.12.2020 08:20
Mathematics, 18.12.2020 08:20
Mathematics, 18.12.2020 08:20
Health, 18.12.2020 08:20
Social Studies, 18.12.2020 08:20