subject
Engineering, 13.12.2019 17:31 nyce36

Consider a thin‐walled, metallic tube of length l = 1 m and inside diameter di = 3 mm. water enters the tube at ˙ m = 0.015 kg / s m˙=0.015 kg/s and tm, i = 97°c. a. what is the outlet temperature of the water if the tube surface temperature is maintained at 27°c? ( b. if a 0.5‐mm‐thick layer of insulation of k = 0.05 w/m-k is applied to the tube and its outer surface is maintained at 27°c, what is the outlet temperature of the water? c. if the outer surface of the insulation is no longer maintained at 27°c but is allowed to exchange heat by free convection with ambient air at 27°c, what is the outlet temperature of the water? the free convection heat transfer coefficient is 5 w/m2 -k.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Ahot wire operates at a temperature of 200°c while the air temperature is 20°c. the hot wire element is a tungsten wire of 5 um diameter and 2 mm in length. plot using excel current, heat transfer and heat generated by the wire for air velocity varying from 1-10 m/s in steps of lm/s? matlab the sensor voltage output, resistance, or assume nu 0.989 re033pr13 take air properties at tr (200°c20°c)/2 = 110°c properties of tungsten: c 0.13 kj/kg.k 3 p 19250 kg/m k (thermal conductivity) = 174 w/m.k
Answers: 2
question
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
question
Engineering, 04.07.2019 18:20
Inadequate stores control is not an obstacle to effective work order system. (clo4) a)-true b)-false
Answers: 3
question
Engineering, 04.07.2019 19:10
The proportional limit is always greater than the yield strength for a material. a)-trune b)- false
Answers: 3
You know the right answer?
Consider a thin‐walled, metallic tube of length l = 1 m and inside diameter di = 3 mm. water enters...
Questions
question
Arts, 12.08.2021 02:40
question
Geography, 12.08.2021 02:40
question
Mathematics, 12.08.2021 02:50
question
Mathematics, 12.08.2021 02:50