Engineering, 11.12.2019 19:31 jwbri

An emergency situation has arisen in the milling department, because the ship carrying a certain quantity of a required part from an overseas supplier sank on friday evening. a certain number of machines in the department must therefore be dedicated to the production of this part during the next week. a total of 1000 of these parts must be produced, and the production cycle time per part = 16.0 min. each milling machine used for this rush job must first be set up, which takes 5.0 hr. a scrap rate of 2% can be expected. assume availability = 100%.(a) if the production week consists of 10 shifts at 8.0 hr/shift, how many machines will be required? (b) it so happens that only two milling machines can be spared for this emergency job, due to other priority jobs in the department. to cope with the emergency situation, plant management has authorized a three-shift operation for six days next week. can the 1,000 replacement parts be completed within these constraints?

Answers: 2

Show answers

Another question on Engineering

Engineering, 03.07.2019 19:30

When using the ohmmeter function of a digital multimeter, the leads are placed in what position relative to the component being tested? a. parallel b. control c. series d. line

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented

Answers: 2

Answer

Engineering, 04.07.2019 18:10

An air compression refrigeration system is to have an air pressure of 100 psia in the brine tank and an allowable air temperature increase of 60°f for standard vapor compression cycle temperatures of 77 f entering the expansion cylinder and 14 f entering the compression cylinder, calculate the coefficient of performance a. 2.5 b 3.3 c. 4.0 d. 5.0

Answers: 3

Answer

You know the right answer?

An emergency situation has arisen in the milling department, because the ship carrying a certain qua...

Questions