subject
Engineering, 10.12.2019 03:31 makaylahamrick

The heat flux through a 1-mm thick layer of skin is 1.05 x 104 w/m2. the temperature at the inside surface is 37°c and the temperature at the outside surface is 30°c. a. what is the thermal conductivity of the skin? b. a layer of clothing material with half the thermal conductivity of skin and twice the thickness of skin is placed on the outside surface of the skin. if the outside surface of the clothing is maintained at 30°c, what is the new heat flux from the skin and what is the temperature at the skin-insulation interface?

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false
Answers: 3
question
Engineering, 04.07.2019 18:10
Refrigerant 134a enters an insulated compressor operating at steady state as saturated vapor at -26°c with a volumetric flow rate of 0.18 m3/s. refrigerant exits at 9 bar, 70°c. changes in kinetic and potential energy from inlet to exit can be ignored. determine the volumetric flow rate at the exit, in m3/s, and the compressor power, in kw.
Answers: 1
question
Engineering, 04.07.2019 18:10
The higher the astm grain-size number, the coarser the grain is. a)-true b)-false
Answers: 3
question
Engineering, 04.07.2019 18:10
Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.
Answers: 3
You know the right answer?
The heat flux through a 1-mm thick layer of skin is 1.05 x 104 w/m2. the temperature at the inside s...
Questions