Water enters the constant 130-mm inside-diameter tubes of a boiler at 7 mpa and 65°c and leaves the tubes at 6 mpa and 450°c with a velocity of 80 m/s. calculate the velocity of the water at the tube inlet and the inlet volume flow rate. the specific volumes of water at the inlet and exit are 0.001017 m3/kg and 0.05217 m3/kg.

v_1 - 1.55 m/s

flow rate is  = 0.0206 m^3/s

Explanation:

Given data:

inside diameter is 130 mm

velocity v_2 = 80 m/s

specific volume

initial velocity can be calculated by equating mass flow rate at inlet and outlet point

inital flow rate is calculated as

the warning light flashes for a second or two when the engine starts. if it stays on, there's must be something wrong with the coolant. you should never dare to continue driving when the light is on. pull over as soon as possible and shut the engine off.

hope this is what you're talking about