subject
Engineering, 05.12.2019 21:31 estherdinhllama

The popularity of orange juice, especially as a breakfast drink, makes this beverage an important factor in the economy of orange-growing regions. most marketed juice is concentrated and frozen and then reconstituted before consumption, and some is "not-from-concentrate." although concentrated juices are less popular in the united states than they were at one time, they still have a major segment of the market for orange juice. the approaches to concentrating orange juice include evaporation, freeze concentration, and reverse osmosis. here we examine the evaporation process by focusing only on two constituents in the juice solids and water. fresh orange juice contains approximately 10 wt% solids (sugar, citric acid, and other ingredients) and frozen concentrate contains approximately 42 wt% solids. the frozen concentrate is obtained by evaporating water from the fresh juice to produce a mixture that is approximately 65 wt% solids. however, so that the flavor of the concentrate will closely approximate that of fresh juice, the concentrate from the evaporator is blended with fresh orange juice (and other additives) to produce a final concentrate that is approximately 42 wt% solids. (a) label the flowchart of this process, neglecting the vaporization of everything in the juice but water first prove that the subsystem containing the point where the bypass stream splits off from the evaporator feed has one degree of freedom. (if you think it has zero degrees, try determining the unknown variables associated with this system.) then perform the degree-of freedom analysis for the overall system, the evaporator, and the bypass-evaporator product mixing point, and write in order the equations you would solve to determine all unknown stream variables. in each equation, circle the variable for which you would solve, but don't do any calculations. (b) calculate the amount of product (42% concentrate) produced per 100 kg fresh juice fed to the process and the fraction of the feed that bypasses the evaporator. bypass mising point evaporator

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Which one from below is not one of the reasons of planning failures? (clo3) a)-planner is careless. b-planner spend less time in the field but more time on the desk c)-planner is not qualified d)-planner does not have sufficient time to properly plan
Answers: 3
question
Engineering, 04.07.2019 18:20
Vibration monitoring this technique uses the noise or vibration created by mechanical equipment and in seme cases by plant systems to detemine their actual condtion. a)- true b)- false
Answers: 2
question
Engineering, 04.07.2019 19:10
Air inially occupying a volume of 1 m2 at 100 kpa, 27 c undergoes three internally reversible processes in series. process 1-2 compression to 500 kpa during which pv constant process 2-3 adiabatic expanslon to 100 kpa process 3-1: constant-pressure expansion to 100 kpa (a) calculate the change of entropy for each of the three processes. (b) calculate the heat and work involved in each process. (c) is this cycle a power cycle or refrigeration cycle?
Answers: 3
question
Engineering, 04.07.2019 19:10
When subject to a steady load (within elastic range) over a long period of time, what is the major difference in material behavoir between steel and plastic?
Answers: 2
You know the right answer?
The popularity of orange juice, especially as a breakfast drink, makes this beverage an important fa...
Questions
question
Mathematics, 20.09.2021 06:10
question
Mathematics, 20.09.2021 06:10
question
Mathematics, 20.09.2021 06:10
question
Mathematics, 20.09.2021 06:10
question
Geography, 20.09.2021 06:10
question
Mathematics, 20.09.2021 06:10
question
Physics, 20.09.2021 06:10
question
Mathematics, 20.09.2021 06:10