subject
Engineering, 05.12.2019 20:31 indya2

A480-v, 60-hz, 6-pole, y-connected, three-phase induction motor has a stator impedance of 0.2 + j0.43 ohm per phase and a rotor impedance of 0.04 +j0.7 ohm per phase at standstill. the core-loss resistance is 150 ohm/phase, and the magnetization reactance is 760 ohm/phase. the friction and windage loss is 2500w. when the motor operates at its full-load slip of 7%, determine 1. the power input 2. the stator copper loss 3. the rotor copper loss 4. the air-gap power 5. the power developed 6. the power output 7. the efficiency 8. the shaft torque 9. the horsepower rating of the motor.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
question
Engineering, 04.07.2019 19:10
What is a monomer? how do they form a ploymer from the view point of chemical bonding?
Answers: 1
question
Engineering, 04.07.2019 19:10
Aplate of dimensions 3 m x 3 m is placed 0.37 mm apart from a fixed plate. the plate requires a force of 2n to move at speed of 45 cm/s. evaluate the viscosity of the fluid in between the plates
Answers: 3
question
Engineering, 04.07.2019 19:20
At steady state, air at 200 kpa, 325 k, and mass flow rate of 0.5 kg/s enters an insulated duct having differing inlet and exit cross-sectional areas. the inlet cross-sectional area is 6 cm2. at the duct exit, the pressure of the air is 100 kpa and the velocity is 250 m/s. neglecting potential energy effects and modeling air as an 1.008 kj/kg k, determine ideal gas with constant cp = (a) the velocity of the air at the inlet, in m/s. (b) the temperature of the air at the exit, in k. (c) the exit cross-sectional area, in cm2
Answers: 2
You know the right answer?
A480-v, 60-hz, 6-pole, y-connected, three-phase induction motor has a stator impedance of 0.2 + j0.4...
Questions