subject
Engineering, 03.12.2019 18:31 SupremeNerdx

You are given designs of 3 caches for a 16-bit address machine: d1: direct-mapped cache. each cache line is 1 byte. 10-bit index, 6-bit tag. 1 cycle hit time. d2: 2-way set associative cache. each cache line is 1 word (4 bytes). 7-bit index, 7-bit tag. 2 cycle hit time. d3: fully associative cache with 256 cache lines. each cache line is 1 word. 14-bit tag. 5 cycle hit time. answer the following set of questions: a) what is the size of each cache? b) how much space does each cache need to store tags? c) which cache design has the most conflict misses? which has the least? d) the following information is given to you: hit rate for the 3 caches is 50%, 70% and 90% but did not tell you which hit rate corresponds to which cache, which cache would you guess corresponded to which hit rate? why?

ansver
Answers: 2

Another question on Engineering

question
Engineering, 03.07.2019 15:10
Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.
Answers: 1
question
Engineering, 04.07.2019 18:10
Aloaded platform of total mass 500 kg is supported by a dashpot and by a set of springs of effective stiffness 72 kn/m. it is observed that when the platform is depressed through a distance x = 12.5 cm below its equilibrium position and then released without any initial velocity; it reaches its equilibrium position in the shortest possible time without overshoot. find the position and velocity of the loaded platform 0.10 sec. after its release. if a further load of 400 kg is added to the platform, find, i) the frequency of damped vibrations, and i) the amplitude of vibration after 2 complete oscillations, given that the initial amplitude is 15 cm.
Answers: 1
question
Engineering, 04.07.2019 18:10
Aflywheel accelerates for 5 seconds at 2 rad/s2 from a speed of 20 rpm. determine the total number of revolutions of the flywheel during the period of its acceleration. a.5.65 b.8.43 c. 723 d.6.86
Answers: 2
question
Engineering, 04.07.2019 18:20
Aquick transition of the operating speed of a shaft from its critical speed will whirl amplitude. (a) increase (b) limit (c) not affect (d) zero
Answers: 2
You know the right answer?
You are given designs of 3 caches for a 16-bit address machine: d1: direct-mapped cache. each cach...
Questions
question
Mathematics, 24.07.2020 01:01
question
Mathematics, 24.07.2020 01:01
question
Mathematics, 24.07.2020 01:01