Engineering, 03.12.2019 02:31 chevi2005
A1 m3 rigid tank initially contains air whose density is 1.18kg/m3. the tank is connected to a high pressure supply line througha valve. the valve is opened, and air is allowed to enter the tankuntil the density in the tank rises to 7.20 kg/m3.
determine themass of air that has entered the tank.
Answers: 3
Another question on Engineering
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
Engineering, 04.07.2019 19:10
What is the chief metrological difference between measuring with a microscope and with an electronic comparator? a. the microscope is limited to small workpieces.a. the microscope is limited to small workpieces. c. the comparator can only examine one point on the workpiece. d. the microscope carries its own standard.
Answers: 1
Engineering, 04.07.2019 19:20
A21-tooth spur pinion mates with a 28-tooth gear. the diametral pitch is 3 teeth/in and the pressure angle is 20°, find the following values: the addendum, dedendum, circular pitch, tooth thickness, and base circle diameters.
Answers: 2
Engineering, 06.07.2019 03:20
Not a characteristic property of ceramic material (a) high temperature stability (b) high mechanical strength (c) low elongation (d) low hardness
Answers: 2
You know the right answer?
A1 m3 rigid tank initially contains air whose density is 1.18kg/m3. the tank is connected to a high...
Questions
Mathematics, 22.07.2019 08:00
Chemistry, 22.07.2019 08:00
English, 22.07.2019 08:00
Mathematics, 22.07.2019 08:00
English, 22.07.2019 08:00
History, 22.07.2019 08:00
Social Studies, 22.07.2019 08:00
Mathematics, 22.07.2019 08:00
