Engineering, 02.12.2019 18:31 armstrongstang420

Parts arrive at a two-machine system according to an exponential interarrival distribution with mean 20 minutes; the fi rst arrival is at time 0. upon arrival, the parts are sent to machine 1 and processed. the processing-time distribution is tria(4.5, 9.3, 11) minutes. the parts are then processed at machine 2 with a processing-time distribution as tria(16.4, 19.1, 20.8) minutes. the parts from machine 2 are directed back to machine 1 to be processed a second time (same processing-time distribution as the fi rst visit but an independent draw from it). the completed parts then exit the system. run the simulation for a single replication of 20,000 minutes to observe the average number in the machine queues and the average part cycle time.

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Modern high speed trains do not have perpendicular expansion gaps where rails are joined end-to-end any more they are mostly welded together but what might happen if there was a spell of particularly hot weather that causes inspection of the tracks?

Answers: 1

Answer

Engineering, 04.07.2019 19:10

Asteam is contained in a rigid tank with a volume of 1 m3. initially, the pressure and temperature are 7 bar and 500 oc, respectively. the temperature drops due to cooling process. determine: (1) the temperature at which condensation begins in °c, (2) the fraction of the total mass that has condensed when the pressure decreased to 0.5 bar. (3) the volume in m3 occupied by saturated liquid at the final state?

Answers: 3

Answer

Engineering, 04.07.2019 19:10

10 kg of co2 is initially contained at 400 kpa and 300 k. the gas constant for carbon dioxide is 189 j/lkg k) and has a specific heat ratio, k, of 1.289. isentropic expansion then occurs until the pressure is 200 kpa. a) determine the initial volume of co2 in m. b) determine the final temperature in k. c) determine the work done by the system during the expansion kl.

Answers: 2

Answer

You know the right answer?

Parts arrive at a two-machine system according to an exponential interarrival distribution with mean...

Questions