Engineering, 30.11.2019 05:31 sevanah5506

An air conditioner operating at steady state takes in moist air at 28°c, 1 bar, and 70% relative humidity. the moist air first passes over a cooling coil in the dehumidifier unit and some water vapor is condensed. the rate of heat transfer between the moist air and the cooling coil is 11 tons. saturated moist air and condensate streams exit the dehumidifier unit at the same temperature. the moist air then passes through a heating unit, exiting at 24°c, 1 bar, and 40% relative humidity. neglecting kinetic and potential energy effects, determine:
(a) the temperature of the moist air exiting the dehumidifier unit, in °c.
(b) the volumetric flow rate of the air entering the air conditioner, in m3 /min.
(c) the rate water is condensed, in kg/min.
(d) the rate of heat transfer to the air passing through the heating unit, in kw.

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Burgers vector is generally parallel to the dislocation line. a)-true b)-false

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Describe one experiment in which the glass transition temperature and melting temperature of a totally amorphous thermoplastic material can be determined. show the relevant experimental results in a diagram which should be properly annotated with the two temperatures clearly marked. what is likely to happen to the curve in the diagram if the amorphous polymer is replaced by a thermosetting type?

Answers: 2

Answer

Engineering, 04.07.2019 18:20

A2-m rigid tank initially contains saturated water vapor at 100 kpa. the tank is connected to a supply line through a valve. steam is flowing in the supply line at 600 kpa and 300 c. the valve is opened, and steam is allowed to enter the tank until the pressure in the tank reaches the line pressure, at which point the valve is closed. a thermometer placed in the tank indicates that the temperature at the final state is 200°c. determine (a) the mass of steam that has entered the tank (b) the amount of heat transfer.

Answers: 3

Answer

You know the right answer?

An air conditioner operating at steady state takes in moist air at 28°c, 1 bar, and 70% relative hum...

Questions