Engineering, 30.11.2019 04:31 xxxanitaxxx
Simulate the circuit using logicworks software. simplified elevator design problem: if the elevator is on floor m (for m ≥ 0) and the floor requested is floor m, then the elevator remains on floor m. if the elevator is on floor m and the floor requested is floor m + i, (for i > 0), the elevator moves up to floor m+i. if the elevator is on floor m and the floor requested is floor m - i (for i > 0), then the elevator moves to floor m-i. simulate and design an l-floor elevator controller according to the above description. build it using your boards and chips. you may use 1. the switches to generate the floor request signals. 2. leds to indicate the up or down movement of the elevator. 3. one 7 segment display/driver board to display how many floors the elevator moves; or both displays to indicate the request and the position of elevator. make any appropriate assumptions, and specify exactly how the switches should be set to initialize the circuit (if necessary) and to move the elevator from one floor to another.
Answers: 2
Engineering, 04.07.2019 03:10
What precautions should you take to prevent injuries when dealing with heavy loads?
Answers: 1
Engineering, 04.07.2019 18:10
The mass flow rate of the fluid remains constant in all steady flow process. a)- true b)- false
Answers: 1
Engineering, 04.07.2019 18:10
Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.
Answers: 3
Engineering, 04.07.2019 18:10
Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk
Answers: 1
Simulate the circuit using logicworks software. simplified elevator design problem: if the elevator...
Mathematics, 31.08.2021 14:00
English, 31.08.2021 14:00
History, 31.08.2021 14:00
Health, 31.08.2021 14:00
World Languages, 31.08.2021 14:00
Mathematics, 31.08.2021 14:00
Geography, 31.08.2021 14:00
Mathematics, 31.08.2021 14:00
Mathematics, 31.08.2021 14:00
Mathematics, 31.08.2021 14:00