subject
Engineering, 30.11.2019 01:31 ayindejoy

John was told that for his first design project, he was to examine the uniform water flow (68 degree fareneheit) through a 6ft wide rectangular channel (n=0.015). the total distance of the open channel is expected to be 5000 ft with an elevation drop of 15 ft. for the gtiven perameters what would be the following characteristics of the open channel if the water depth is 2.5 ft, find channel slope, and hydraulic radius?

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way
Answers: 2
question
Engineering, 04.07.2019 18:10
The higher the astm grain size number, the finer the gran is. a)-true b)-false
Answers: 2
question
Engineering, 04.07.2019 19:10
An electric kettle is made out of stainless steel, weighs two pounds (when empty) and is equipped with a heating element that consumes 2 kw of electricity. assuming that the water and the kettle are at the same uniform temperature at any moment of time, calculate the shortest possible time to bring 2 quarts of water from room temperature to the onset of boiling
Answers: 2
question
Engineering, 04.07.2019 19:20
Aseries piping system conveys methyl alcohol. the system consists of 70 m of 1- nominal pipe follow by 50 m of 2-nominal pipe, both schedule 40 commercial steel. the 1-nominal pipe contains 3 90° elbows (regular) anda fully open gate valve, all threaded. the pressure drop through the system is 150 kpa. determine the volume flow rate through the system that is horizontally laid.
Answers: 1
You know the right answer?
John was told that for his first design project, he was to examine the uniform water flow (68 degree...
Questions
question
Mathematics, 04.07.2019 03:30
question
Mathematics, 04.07.2019 03:30