Engineering, 29.11.2019 07:31 euniceyi56

For a bolted assembly with six bolts, the stiffness of each bolt is kb = 2 mlbf/in and the stiffness of the members is km = 14 mlbf/in per bolt. an external load of 80 kips is applied to the entire joint. assume the load is equally distributed to all the bolts. it has been determined to use 1/2 in-13 unc grade 8 bolts with rolled threads. it is desired to ﬁnd the range of torque that a mechanic could apply to initially preload the bolts without expecting failure once the joint is loaded. assume a torque coefﬁcient of k = 0.2.

a. determine the yielding factor of safety.
b. determine the overload factor of safety

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

If a particle moves along a path such that r : (3 sin t) m and ? : 2t rad, where t is in seconds. what is the particle's acceleration in m/s in 4 seconds? a)- 16.43 b)- 16.29 c)- 15.21 d)- 13.79

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Apump is used to circulate hot water in a home heating system. water enters the well-insulated pump operating at steady state at a rate of 0.42 gal/min. the inlet pressure and temperature are 14.7 lbf/in.2, and 180°f, respectively; at the exit the pressure is 60 lbf/in.2 the pump requires 1/15 hp of power input. water can be modeled as an incompressible substance with constant density of 60.58 lb/ft3 and constant specific heat of 1 btu/lb or. neglecting kinetic and potential energy effects, determine the temperature change, in °r, as the water flows through the pump.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Calculate the bore of a cylinder that has a stroke of 18 inches and an extension time of 6 seconds at a flow rate of 4 gal/min.

Answers: 3

Answer

You know the right answer?

For a bolted assembly with six bolts, the stiffness of each bolt is kb = 2 mlbf/in and the stiffness...

Questions