subject
Engineering, 29.11.2019 05:31 ithebrainliest

Aniline is to be cooled from 200 to 150°f in a double-pipe heat exchanger having a total outside area of 70 ft2. for cooling, a stream of toluene amounting to 8,600 lb/h at a temperature of 100°f is available. the exchanger consists of 1¼-in. schedule 40 pipe in 2-in. schedule 40 pipe. the aniline flow rate is 10,000 lb/h.

(a) if flow is countercurrent, what are the toluene outlet temperature, the lmtd, and the overall heat-transfer coefficient?
(b) what are they if flow is parallel?
(c) how much aniline can be cooled if the over-all heat-transfer coefficient is 70 btu/ft2•h•°f?

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 03:10
What precautions should you take to prevent injuries when dealing with heavy loads?
Answers: 1
question
Engineering, 04.07.2019 18:10
Apump is used to circulate hot water in a home heating system. water enters the well-insulated pump operating at steady state at a rate of 0.42 gal/min. the inlet pressure and temperature are 14.7 lbf/in.2, and 180°f, respectively; at the exit the pressure is 60 lbf/in.2 the pump requires 1/15 hp of power input. water can be modeled as an incompressible substance with constant density of 60.58 lb/ft3 and constant specific heat of 1 btu/lb or. neglecting kinetic and potential energy effects, determine the temperature change, in °r, as the water flows through the pump.
Answers: 1
question
Engineering, 04.07.2019 18:10
Consider a large isothermal enclosure that is maintained at a uniform temperature of 2000 k. calculate the emissive power of the radiation that emerges from a small aperture on the enclosure surface. what is the wavelength ? , below which 10% of the emission is concentrated? what is the wavelength ? 2 above which 10% of the emission is concentrated? determine the wavelength at which maximum spectral emissive power occurs. what is the irradiation incident on a small object placed inside the enclosure?
Answers: 2
question
Engineering, 04.07.2019 18:10
Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?
Answers: 3
You know the right answer?
Aniline is to be cooled from 200 to 150°f in a double-pipe heat exchanger having a total outside are...
Questions
question
Mathematics, 10.11.2019 03:31
question
Mathematics, 10.11.2019 04:31