subject
Engineering, 28.11.2019 03:31 vjackie101ov3kju

In the previous problem you found out that that the ratio between enterprise's speeds at points a and b on the elliptical (transfer) orbit is 1/3. since there are no forces acting on the enterprise+ earth system the total mechanical energy of the system is conserved while enterprise is moving on the elliptical orbit. write that the total energy in points a and b is the same and find the entrance (va ) and exit (vb ) speeds the entreprise must match exactly in order to leave the outer circular orbit and engage onto the inner circular orbit. give your answer in terms of g, me and r. enter a comma between the two expressions

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
The filament of an incandescent lamp has a temperature of 2000k. calculate the fraction of radiation emitted in the visible light band if the filament is approximated as blackbody
Answers: 2
question
Engineering, 04.07.2019 18:10
Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way
Answers: 2
question
Engineering, 04.07.2019 18:10
Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?
Answers: 3
question
Engineering, 04.07.2019 18:10
Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.
Answers: 3
You know the right answer?
In the previous problem you found out that that the ratio between enterprise's speeds at points a an...
Questions