Engineering, 28.11.2019 01:31 katey6934
To augment heat transfer between two flowing fluids, it is proposed to insert a 100-mm- long, 5-mm-diameter 2024 aluminum pin fin through the wall separating the two fluids, as seen in fig.1. the pin is inserted to a depth of d into fluid 1. fluid 1 is air with a mean temperature of 10°c and nearly uniform velocity of 10 m/s. fluid 2 is air with a mean temperature of 40°c and mean velocity of 3 m/s.
a) determine the rate of heat transfer from the warm air to the cool air through the pin fin for d=50 mm
b) plot the variation of the heat transfer rate with the insertion distance,
d. does an optimal insertion distance exist? t = 10°c, v = 10 m/s d-5 mm l = 100 mm 7.-40°c, v = 3 m/s
Answers: 1
Engineering, 04.07.2019 18:10
Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.
Answers: 2
Engineering, 04.07.2019 18:10
For the closed feedwater heater below, feedwater enters state 3 at a pressure of 2000 psia and temperature of 420 °f at a rate of ix10 ibhr. the feedwat extracted steam enters state 1 at a pressure of 1000 psia and enthalpy of 1500 btu/lbm. the extracted er leaves at an enthalpy of 528.7 btu/lbm steam leaves as a saturated liquid. (16) a) determine the mass flow rate of the extraction steam used to heat the feedwater (10) b) determine the terminal temperature difference of the closed feedwater heater
Answers: 3
Engineering, 04.07.2019 18:10
You are making beer. the first step is filling the glass carboy with the liquid wort. the internal diameter of the carboy is 15 in., and you wish to fill it up to a depth of 2 ft. if your wort is drawn from the kettle using a siphon process that flows at 3 gpm, how long will it take to fill?
Answers: 1
Engineering, 04.07.2019 18:20
Air is compressed isentropically from an initial state of 300 k and 101 kpa to a final temperature of 1000 k. determine the final pressure using the following approaches: (a) approximate analysis (using properties at the average temperature) (b) exact analysis
Answers: 1
To augment heat transfer between two flowing fluids, it is proposed to insert a 100-mm- long, 5-mm-d...
Advanced Placement (AP), 26.05.2021 03:00
Health, 26.05.2021 03:00
History, 26.05.2021 03:00
Mathematics, 26.05.2021 03:00
Mathematics, 26.05.2021 03:00
Mathematics, 26.05.2021 03:00
Physics, 26.05.2021 03:00
History, 26.05.2021 03:00