Engineering, 27.11.2019 23:31 2000samantha
Aperson with no experience in fluid mechanics wants to estimate the friction factor for 1-in.-diameter galvanized iron pipe at a reynolds number of 12000. the person stumble across the simple equation of f = 64/re and use this to calculate the friction factor. consider the problem with this approach and estimate percentage of their error (fa-f)/fa, where fa – actual friction factor.
Answers: 2
Another question on Engineering
Engineering, 03.07.2019 14:10
Line joining liquid phase with liquid and solid phase mixture is known as: a) liquidus b) solidus c) tie line d) none of the mentioned
Answers: 2
Engineering, 04.07.2019 18:20
Inspection for bearing condition will include: (clo4) a)-color b)-smell c)-size d)-none of the above
Answers: 1
Engineering, 04.07.2019 18:20
Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.
Answers: 3
Engineering, 04.07.2019 18:20
Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent
Answers: 2
You know the right answer?
Aperson with no experience in fluid mechanics wants to estimate the friction factor for 1-in.-diamet...
Questions
Biology, 23.07.2019 04:30
Social Studies, 23.07.2019 04:30
Social Studies, 23.07.2019 04:30
Social Studies, 23.07.2019 04:30
