Engineering, 27.11.2019 02:31 jacobballew2019

You wish to capture particles with a 3 µm radius suspended in a fluid that has a linear density gradient with a density of 1.12 g/cm^3 at the bottom and 1.00 g/cm^3 at the top. you layer a thin particle suspension on the top of the 6 cm column of fluid with a viscosity of 1.0 cp and allow particles to settle.
a) how long must you wait for particles with a density of 1.07 g/cm^3 to sediment to within 0.1 cm of their isopycnic level (i. e., within 0.1 cm of the position where the density of the particles and the density of the fluid are equal)?
b) instead of settling due to gravity, you choose to use a centrifuge running at 800 rpm. if the top of the fluid is 5 cm from the center of rotation, how long must you run the centrifuge for the particles to move to within 0.1 cm of their isopycnic level?

Answers: 1

Show answers

Another question on Engineering

Engineering, 03.07.2019 15:10

Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

At 12 noon, the count in a bacteria culture was 400; at 4: 00 pm the count was 1200 let p(t) denote the bacteria cou population growth law. find: (a) an expression for the bacteria count at any time t (b) the bacteria count at 10 am. (c) the time required for the bacteria count to reach 1800.

Answers: 1

Answer

Engineering, 04.07.2019 18:20

Air flows over a heated plate àt a velocity of 50m/s. the local skin factor coefficient at a point on a plate is 0.004. estimate the local heat transfer coefficient at this point.the following property data for air are given: density = 0.88kg/m3 , viscosity 2.286 x 10 ^-5 kgm/s , k = 0.035w/mk ,cp = 1.001kj/kgk. use colburn reynolds analogy.

Answers: 1

Answer

Engineering, 04.07.2019 18:20

Aheavily insulated piston-cylinder device contains 0.02 m3 of steam at 300 kpa and 200 °c. 1.2 mpa. d this process. team is now compressed in a reversible manner to a pressure of etermine the entropy change and the work done on the steam during this process

Answers: 1

Answer

You know the right answer?

You wish to capture particles with a 3 µm radius suspended in a fluid that has a linear density grad...

Questions