Engineering, 27.11.2019 01:31 dd123984
11. the optimum shape of a riser is spherical to ensure that it cools more slowly than the casting it feeds. spherically shaped risers, however, are difficult to cast. (1) sketch the shape of a blind riser that is easy to mold, but also has the smallest possible surface area-to-volume ratio. (2)compare the solidificationtime of the riser in part (a) to that of a riser shaped like a right circular cylinder. assumethat the volume of each riser is the same, and that for each the height is equal to the diameter.
Answers: 1
Another question on Engineering
Engineering, 04.07.2019 18:10
Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented
Answers: 2
Engineering, 04.07.2019 18:10
Items are similar to the free issue items, but their access is limited. (clo5) a)-bin stock items free issue b)-bin stock controlled issue c)-critical or insurance spares d)-rebuildable spares e)-consumables
Answers: 1
Engineering, 04.07.2019 18:10
Journeyman training is usually related (clo2) a)-to specific tasks b)-to cost analysis of maintenance task c)-to control process to ensure quality d)-to installation of machinery
Answers: 2
Engineering, 04.07.2019 18:20
Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.
Answers: 3
You know the right answer?
11. the optimum shape of a riser is spherical to ensure that it cools more slowly than the casting i...
Questions
History, 02.03.2020 23:29
Computers and Technology, 02.03.2020 23:29
Advanced Placement (AP), 02.03.2020 23:30
