3. design a bandpass filter having the following specifications: nominal lower cutoff frequency of 300hz; upper cutoff frequency of 50khz, gain magnitude of 10.0 in the passband; gain magnitude of less than 0.05 at 60hz; gain magnitude of less than 0.01 at 500khz. draw the complete filter circuit schematic and denote the resistor/capacitor values.

During a steady flow process, the change of energy with respect to time is zero. a)- true b)- false

Ariver flows from north to south at 8 km/h. a boat is to cross this river from west to east at a speed of 20 km/h (speed of the boat with respect to the earth/ground). at what angle (in degrees) must the boat be pointed upstream such that it will proceed directly across the river (hint: find the speed of the boat with respect to water/river)? a 288 b. 21.8 c. 326 d. 30.2

Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.