Engineering, 26.11.2019 05:31 bobxspam
Alaminated plastic beam of square cross section is built up by gluing together three strips, each 10 mm 3 30 mm in cross section. the beam has a total weight of 3.6 n and is simply supported with span length l 5 360 mm. considering the weight of the beam (q), calculate the maximum permissible ccw moment m that may be placed at the right support.
(a) the allowable shear stress in the glued joints is 0.3 mpa.
(b) the allowable bending stress in the plastic is 8 mpa
Answers: 2
Another question on Engineering
Engineering, 04.07.2019 18:10
True or false (explain) (110)[111] is a slip system in bcc metals . the {111} family in fcc contains 8 planes. resolved shear stress (rss) in single crystals is just related to the applied stress. critical resolved shear stress (crss) in single crystal metals is direct proportional to the number of defects in the structure
Answers: 2
Engineering, 04.07.2019 18:10
Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.
Answers: 3
Engineering, 04.07.2019 18:20
Inadequate stores control is not an obstacle to effective work order system. (clo4) a)-true b)-false
Answers: 3
Engineering, 04.07.2019 18:20
The characteristic roots of a dynamic system are: 1.7920 1.8160 i, -1.7920 1.8160 i, -0.4160 what is the order of this system? what are the settling time and damping ratio of the system?
Answers: 3
You know the right answer?
Alaminated plastic beam of square cross section is built up by gluing together three strips, each 10...
Questions
Computers and Technology, 04.12.2019 02:31
Computers and Technology, 04.12.2019 02:31
