Engineering, 26.11.2019 03:31 horsedoggal1234

Listed below are total and suspended solids data on an industrial wastewater sample.

calculate total solids, total volatile solids, suspended solids, volatile suspended solids and dissolved solids.

total solids data

weight of an empty dish = 85.337 g
weight of dish plus dry solids =85.490 g
weight of dish plus ignited solids = 85.375 g
volume of water sample = 85 ml

suspended solids data
weight of glass-fiber dish = 0.1400 g
weight of dish plus dry solids = 0.1530 g
weight of dish plus ignited solids = 0.1426 g
volume of wastewater filtered = 200 ml

Answers: 2

Show answers

Another question on Engineering

Engineering, 03.07.2019 23:20

Two technicians are discussing the intake air temperature (iat) sensor. technician a says that the computer uses the iat sensor as a backup to the engine coolant temperature (ect) sensor. technician b says that the powertrain control module (pcm) will subtract the calculated amount of fuel if the air measures hot. who is correct

Answers: 3

Answer

Engineering, 04.07.2019 18:20

The characteristic roots of a dynamic system are: 1.7920 1.8160 i, -1.7920 1.8160 i, -0.4160 what is the order of this system? what are the settling time and damping ratio of the system?

Answers: 3

Answer

Engineering, 04.07.2019 19:20

Asimple speed reducer is composed of 2 spur gears. the pinion gear has a pitch diameter of 0.75" and 36 teeth while the driven gear has a pitch diameter of 4.0" and 192 teeth. a)-what is the diametral pitch of each gear? b)-if an electric motor rotating ccw at 3000 rpm is coupled to the pinion, what is the rotational speed of the driven gear? c)-if the torque delivered to the pinion is 1 n-m, what is the torque on the driven gear? d)-what is the power transmitted by the gear train?

Answers: 1

Answer

Engineering, 06.07.2019 03:10

Asolid steel sphere (k=63.9 w m-1 k-1 , ? =7832 kg m-3 , c=0.523 kj kg-1 k-1 ), 100 mm in diameter is initially at a uniform temperature of 500o c and is suddenly quenched in a large oil bath for which t? = 100o c and h = 3200 w m-2 k-1. estimate the time required for the sphere to cool to 200o c and to 110o c

Answers: 1

Answer

You know the right answer?

Listed below are total and suspended solids data on an industrial wastewater sample.

ca...

Questions