Engineering, 26.11.2019 00:31 brie7396
A200-mm-long, 75-mm-diameter titanium-alloy rod is being reduced in diameter to 65 mm by turning on a lathe. the spindle rotates at 400 rpm, and the tool is traveling at an axial velocity of 200 mm/min. calculate the cutting speed, material removal rate, time of cut, power required, and cutting force.
Answers: 3
Another question on Engineering
Engineering, 03.07.2019 14:10
Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.
Answers: 1
Engineering, 04.07.2019 18:10
During a steady flow process, the change of energy with respect to time is zero. a)- true b)- false
Answers: 2
Engineering, 04.07.2019 18:10
Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.
Answers: 3
Engineering, 04.07.2019 18:10
Compute the pressure drop of 30°c air flowing with a mean velocity of 8 m/s in a circular sheet-metal duct 300 mm in diameter and 15 m long. use a friction factor, f 0.02, and pair = 1.1644 kg/m a. 37.26 pa b. 25.27 pa n c. 29.34 pa d. 30.52 pa
Answers: 1
You know the right answer?
A200-mm-long, 75-mm-diameter titanium-alloy rod is being reduced in diameter to 65 mm by turning on...
Questions
