subject
Engineering, 25.11.2019 22:31 naruto63

Consider a magnesium–iron galvanic cell consisting of a magnesium electrode in a solution of 1 m mgso4 and an iron electrode in a solution of 1 m feso4. each electrode and its electrolyte are separated by a porous wall, and the whole cell is at 25°c. both electrodes are connected with a copper wire.
(a) which electrode is the anode?
(b) which electrode corrodes?
(c) in which direction will the electrons flow?
(d) in which direction will the anions in the solutions move?
(e) in which direction will the cations in the solutions move?
(f ) write the equation for the half-cell reaction at the anode.
(g) write the equation for the half-cell reaction at the cathode.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:20
Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.
Answers: 3
question
Engineering, 04.07.2019 19:20
The power source in a certain welding setup generates 3500w that is transferred to the low carbon steel work with a heat transfer factor of 0.85. the melting factor in the operation is 0.45. a continuous fillet weld is to be made with a cross-sectional area of 23 mm2 determine the travel speed at which the welding can be accomplished.
Answers: 3
question
Engineering, 06.07.2019 03:10
Oxygen at 300 kpa and 400 k is in a closed system with an initial volume of 0.1 m3. is now compressed in a polytropic process, with exponent of n 1.2, to a temperature of 500 k. calculate: a) the boundary work done during the compression, in kj b) the heat transfer during the compression, in kj
Answers: 3
question
Engineering, 06.07.2019 03:20
What is the strain energy stored in a solid uniformly circular shaft of length 3.0 m and diameter 120 mm when subject to pure torsion if the maximum shear stress is 40 mpa? g-80gpa
Answers: 1
You know the right answer?
Consider a magnesium–iron galvanic cell consisting of a magnesium electrode in a solution of 1 m mgs...
Questions
question
Mathematics, 28.06.2020 02:01