Engineering, 23.11.2019 00:31 iyana479
Refrigerant-134a enters a compressor at 180 kpa as a saturated vapor with a flow rate of 0.35 m3/min and leaves at 900 kpa. the power supplied to the refrigerant during the compression process is 2.3 kw. what is the temperature of r-134a at the exit of the compressor?
Answers: 3
Engineering, 03.07.2019 14:10
The y form of iron is known as: a) ferrite b) cementite c) perlite d) austenite
Answers: 3
Engineering, 03.07.2019 15:10
Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.
Answers: 1
Engineering, 04.07.2019 18:10
Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.
Answers: 2
Engineering, 04.07.2019 18:10
Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.
Answers: 3
Refrigerant-134a enters a compressor at 180 kpa as a saturated vapor with a flow rate of 0.35 m3/min...
Chemistry, 23.06.2019 16:40
English, 23.06.2019 16:40
Mathematics, 23.06.2019 16:40
Mathematics, 23.06.2019 16:40
History, 23.06.2019 16:40
History, 23.06.2019 16:40
Mathematics, 23.06.2019 16:40
Biology, 23.06.2019 16:40