For the following sorting algorithms write 1-2 paragraphs describing:
(1) how the sorting algorithm works while sorting an array of integers.?
(2) how the numbers in the array moved from one position to another?
(3) what are the advantages of using this algorithm?
(4) what are the disadvantages of using this algorithm?
(5) how long will this algorithm take for the best case, worst case, and normally (this should be a general formula)?

Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false

Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.

Athin walled concentric tube exchanger is used to cool engine oil from 160°c to 60°c with water that is available at 25°c acting as a coolant. the oil and water flow rates are each at 2 kg/s, and the diameter of the inner tube is 0.5 m and the corresponding value of the overall heat transfer coefficient is 250 w/m2. oc. how long must the heat exchanger be to accomplish the desired cooling? cpwater=4.187 kj/kg-candcpengine el=2.035 kj/kg·°c, oil . 120]