subject
Engineering, 21.11.2019 03:31 dprajapati832000

Stimate the theoretical fracture strength of a brittle material if it is known that fracture occurs by the propagation of an elliptically shaped surface crack of length 0.5 mm (0.02 in.) and a tip radius of curvature of 5 Ɨ 10ā€“3 mm (2 Ɨ 10ā€“4 when a stress of 1035 mpa (150,000 psi) is applied.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Draw the engineering stress-strain curve for (a) bcc; (b) fcc metals and mark important points.
Answers: 1
question
Engineering, 04.07.2019 18:10
Atmospheric air has a temperature (dry bulb) of 80Ā° f and a wet bulb temperature of 60Ā° f when the barometric pressure is 14.696 psia. determine the specific humidity, grains/lb dry air. a. 11.4 c. 55.8 d. 22.5 b. 44.1
Answers: 1
question
Engineering, 04.07.2019 18:20
Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.
Answers: 3
question
Engineering, 04.07.2019 18:20
Athin walled concentric tube exchanger is used to cool engine oil from 160Ā°c to 60Ā°c with water that is available at 25Ā°c acting as a coolant. the oil and water flow rates are each at 2 kg/s, and the diameter of the inner tube is 0.5 m and the corresponding value of the overall heat transfer coefficient is 250 w/m2. oc. how long must the heat exchanger be to accomplish the desired cooling? cpwater=4.187 kj/kg-candcpengine el=2.035 kj/kgĀ·Ā°c, oil . 120]
Answers: 1
You know the right answer?
Stimate the theoretical fracture strength of a brittle material if it is known that fracture occurs...
Questions
question
Mathematics, 19.08.2019 15:10
question
History, 19.08.2019 15:10
question
History, 19.08.2019 15:10