Engineering, 20.11.2019 21:31 jasperzhouzihe3018
Submarines that descend to great depths must withstand very high external pressures. since their interiors have to be at atmospheric pressure to accommodate human life, they are like a pressure vessel except with external pressure rather than internal pressure. while there is an external hull that is hydrodynamic, it does not carry the pressure difference. instead, a cylinder shell carries the pressure difference. if seawater has a density of 1027 kg/m3, what should be the wall thickness of the cylindrical shell with a 13 m internal diameter when diving to 400 m, if the normal stress in the steel is limited to 200mpa?
Answers: 2
Another question on Engineering
Engineering, 04.07.2019 18:20
Select any two (2) areas of applications of chain-drive. (clo4) a)-permanent lubrication necessary b)-hydraulic forklift truck operation c)-rigging and heavy moving materials d)-relatively high maintenance costs e)-costlier than belt drives
Answers: 2
Engineering, 04.07.2019 19:10
Asteel wire of 2 mm diameter is fixed between two points located 2 m apart. the tensile force in the wire is 250n, if its density of steel is given by 7830 kg/m3 the fundamental frequency of vibration hz? ?
Answers: 3
Engineering, 04.07.2019 19:20
Apiping systems consists of 6 m of 6-std type k and 12 m of 4-std type k, both drawn copper tubing. the system conveys ethylene glycol at a rate of 0.013 m3/s. the pressure drop across the system is to be calculated. there are two 90° elbows in the 6-in pipe, a reduction from the 6-in pipe to the 4-in pipe and four 90° elbows in the 4-in pipe. all fittings are soldered (same as flanged) and regular. the inlet and outlet of the system are at the same height.
Answers: 1
Engineering, 06.07.2019 02:30
A12 mm diameter shaft runs in a plain cylindrical bush 30 mm long that is located in an 18 mm diameter hole in a housing. the shaft-inner bush fit is h8 f and the outer bush-housing fit is h7-p6. make a fully cimensioned sketch of the bush with tolerances. find the maximum and minimum clearance or interference for both fits on the inner and outer diameters of the bush
Answers: 3
You know the right answer?
Submarines that descend to great depths must withstand very high external pressures. since their int...
Questions
Chemistry, 22.11.2019 18:31
Mathematics, 22.11.2019 18:31
Mathematics, 22.11.2019 18:31
English, 22.11.2019 18:31
English, 22.11.2019 18:31
Mathematics, 22.11.2019 18:31
Mathematics, 22.11.2019 18:31
