Water flows through a tube with a mean velocity of 0.2 m/s. the mean inlet temperature is 20°c and the inside diameter of the tube is 0.5 cm. the water is heated with a uniform surface heat flux of 0.6 w/cm^2. determine:
a) the length required for the outlet temperature to reach 80°c.
b) surface temperature at the outlet.

Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.

Which one from below is not one of the reasons of planning failures? (clo3) a)-planner is careless. b-planner spend less time in the field but more time on the desk c)-planner is not qualified d)-planner does not have sufficient time to properly plan

How much power could a wind turbine produce if it had the following specifications? cp = 0.45 -d=1.2kg/m3 d=50m v 5m/s