Engineering, 20.11.2019 20:31 colebash88
Acylindrical tank is required to contain a gage pressure 560 kpa . the tank is to be made of a516 grade 60 steel with a maximum allowable normal stress of 150 mpa . if the inner diameter of the tank is 2.6 m , what is the minimum thickness, t, of the wall? part b - maximum pressure for a cylindera cylindrical tank is made of a516 grade 60 steel with a maximum allowable normal stress of 150 mpa . if the inner diameter of the tank is 4.9 m and the thickness is 1.4 cm , what is the maximum allowable gage pressure? part c - spherical pressure vessela spherical pressure vessel is required to contain 1.9 m3 of compressed natural gas at 23 mpa . if the tank is made of a516 grade 60 steel with a maximum normal stress 150 mpa , what is the required thickness of the tank wall?
Answers: 1
Another question on Engineering
Engineering, 03.07.2019 14:10
Amass of m 1.5 kg of steam is contained in a closed rigid container. initially the pressure and temperature of the steam are: p 1.5 mpa and t 240°c (superheated state), respectively. then the temperature drops to t2= 100°c as the result of heat transfer to the surroundings. determine: a) quality of the steam at the end of the process, b) heat transfer with the surroundings. for: p1.5 mpa and t 240°c: enthalpy of superheated vapour is 2900 kj/kg, specific volume of superheated vapour is 0. 1483 m/kg, while for t 100°c: enthalpy of saturated liquid water is 419kj/kg, specific volume of saturated liquid water is 0.001043m/kg, enthalpy of saturated vapour is 2676 kj/kg, specific volume of saturated vapour is 1.672 m/kg and pressure is 0.1 mpa.
Answers: 3
Engineering, 03.07.2019 15:10
If you were designing a bumper for a car, would you prefer it to exhibit elastic or plastic deformation? why? consider the functions of a bumper in both a minor "fender-bender" and a major collision.
Answers: 1
Engineering, 04.07.2019 03:10
What precautions should you take to prevent injuries when dealing with heavy loads?
Answers: 1
Engineering, 04.07.2019 16:10
An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)
Answers: 2
You know the right answer?
Acylindrical tank is required to contain a gage pressure 560 kpa . the tank is to be made of a516 gr...
Questions
Computers and Technology, 19.08.2020 20:01
Geography, 19.08.2020 20:01
English, 19.08.2020 20:01
Mathematics, 19.08.2020 20:01
Mathematics, 19.08.2020 20:01
Mathematics, 19.08.2020 20:01
Mathematics, 19.08.2020 20:01
