Engineering, 20.11.2019 06:31 1andonlyrob
Using the periodic table to state the type of bonding and draw representation of the bonding to show your understanding of covalent and ionic bonding. 1.calcium( ca) and chlorine(cl) 2. magnesium(mg) and bromine(br) 3.potassium(k) and fluorine
Answers: 2
Engineering, 03.07.2019 14:10
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
Engineering, 04.07.2019 18:10
Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk
Answers: 1
Engineering, 04.07.2019 18:20
An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid
Answers: 3
Engineering, 04.07.2019 19:10
How to increase the thermal officiency of an ideal simple rankino cycle? among these methods, which one is the best and why?
Answers: 2
Using the periodic table to state the type of bonding and draw representation of the bonding to show...
Computers and Technology, 24.09.2020 01:01
Mathematics, 24.09.2020 01:01
Mathematics, 24.09.2020 01:01
Mathematics, 24.09.2020 01:01
Computers and Technology, 24.09.2020 01:01
Mathematics, 24.09.2020 01:01
Mathematics, 24.09.2020 01:01