subject
Engineering, 18.11.2019 22:31 cindyramirez3140

The 7fa gas turbine manufactured by general electric is reported to have an efficiency of 35.9% in the simple-cycle (brayton) mode and to produce 159 mw of net power. the pressure ratio is 14.7, the turbine inlet temperature is 1,288 c. the mass flow rate through the turbine is 1,536,000 kg/h. taking the ambient conditions to be 20 c and 100 kpa (as the state before the compressor), determine the isentropic efficiency of the turbine and the compressor. also, determine the thermal efficiency of this gas turbine if a regenerator with, an effectiveness of 65 percent is added.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 16:10
The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.
Answers: 1
question
Engineering, 04.07.2019 18:10
Fluids at rest possess no flow energy. a)- true b)- false
Answers: 3
question
Engineering, 04.07.2019 18:10
Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.
Answers: 3
question
Engineering, 04.07.2019 18:10
Which one from below is not one of the reasons of planning failures? (clo3) a)-planner is careless. b-planner spend less time in the field but more time on the desk c)-planner is not qualified d)-planner does not have sufficient time to properly plan
Answers: 3
You know the right answer?
The 7fa gas turbine manufactured by general electric is reported to have an efficiency of 35.9% in t...
Questions
question
Mathematics, 22.10.2019 18:00
question
Social Studies, 22.10.2019 18:00
question
Mathematics, 22.10.2019 18:00
question
Mathematics, 22.10.2019 18:00